This question comes up so here is a great article to answer your hardwood floor in the basement questions. I have them in mine for the past few decades. I love the look plus the easy to maintain aspect. Bookmark this!
Yes, hardwood flooring can be installed in a basement...as long as there is not a water nor moisture issue.
In Westchester County, many basements are below the ground and/or constructed directly on a concrete slab. As a result, many basements (especially in older homes) have water issues/leaks or they tend to have excessive moisture. If you do have either of the issues, I would recommend that you stay away from hardwood as well as laminate flooring. Many customers mistakenly believe that laminate is waterproof...it isn't! And, often laminate will do even worse than hardwood will in a humid basement. Instead, if you have moisture issues, you are better off using a waterproof or water resilient surface such as tile or vinyl.
If your basement is below grade (i.e. beneath the ground) and you DON"T have a water issue, then you need to use an engineered hardwood (rather than solid hardwood). Some engineered hardwoods can be nailed or glued and others click into place.
The choice among hardwood constructions depends on what type of sub-floor you have, the level of the basement and how even the sub-floor is. The species does not matter.
- a) If you have a PLYWOOD sub-floor AND you are on ground level, you are in luck. This means that you have a lot of flexibility in your wood choices. If you are on grade, you can select solid hardwood which can be nailed into the plywood as well as engineered hardwood which can also be nailed into the plywood. This is the best installation method and it tends to cost a bit less. From there, it really just depends on which wood you prefer (and your budget, of course).
- b) If you have a PLYWOOD sub-floor AND your basement is below the ground, then you would need to install an engineered hardwood (solid hardwoods are not approved for below grade levels as there are large swings in temperature/humidity which can cause the floor to buckle and split. Engineered hardwood is designed in layers so that it can tolerate this better. You can learn more about engineered hardwood here: Is Engineered hardwood real? In this scenario with a plywood subfloor, you would generally be best off to have a standard engineered hardwood floor that can be nailed into the plywood.
- c) If you have a CONCRETE subfloor AND you are below the ground, you will need to use an engineered hardwood (see above in paragraph b). If your floor is smooth, then you could install a regular engineered hardwood by gluing it to the sub-floor. It is critical that your floor is smooth and fairly level...otherwise the adhesive won't adhere well to the surface and could pop up. If the floor isn't smooth/level, it is important to level the floor (but this can get expensive). Alternatively, if your floor is fairly level but not smooth, then you could select a clickable hardwood that can be floated on top. You can read more about floating floors here: What is a floating floor? (Please note that if your floor is uneven, your floor can have a lot of movement - just like laminate does..and if it's very unlevel, you should either level it or select a different type of floor surface that can tolerate the unevenness.
- d) If you have a CONCRETE sub-floor AND you are on the ground level, you have some choices pending your budget and how the home is constructed. The less expensive way is to install an engineered hardwood on top of the concrete (you can either glue it or float it (see above - paragraph C ).
- You also have the option of installing a plywood sub-floor (and then installing solid hardwood on top). Solid hardwood requires a plywood sub-floor. If there is enough room (i.e. height), then you can install a 3/4" plywood sub-floor. Altogether, you will be adding 1.5 inches to the height with the combo of the plywood (3/4") and the solid hardwood (3/4"), so it is important to check door heights and transitions, especially if you have any metal doors (which are very challenging to cut or replace). You should also look around the room to make sure there won't be other height issues (e.g. if you have cabinets or appliances there or transitions to other rooms). So, if this will physically work, then it comes down to a budget question, as you need to pay extra for installing the plywood (and installing plywood over concrete is more expensive vs. adding it to wood flooring joists). With concrete, you need to use special hilties and nail guns to secure the plywood into the sub-floor. The costs can definitely add up.
- So, if you add in the plywood to the floor, then you can use either type of hardwood - solid or engineered.
- If you do not add a plywood sub-floor, you will need to use an engineered hardwood. See paragraph C for a discussion on types of engineered constructions.
I hope that this makes sense. Basements are often complicated and it's best to consult a flooring professional on best structure/installation method and whether floor prep is needed (since many basements are uneven) or even whether hardwood is the best choice for your basement.
When you're looking for flooring for your basement in Westchester County, give The Flooring Girl a call at 914-937-2950.
Map of Westchester NY
View Westchester Hardwood Flooring in a larger map
Originally posted at Can Hardwood flooring be installed in a basement?
Can you install hardwood in a basement? Westchester NY
Hardwood Flooring - Carpet - Tile/Natural Stone - Laminate - Refinish Hardwood - Backsplashes
Debbie Gartner, Owner
"The Flooring Girl"
Call us for a free estimate 914-937-2950.
"We bring the store to your door."